What are the correct maintenance methods of brick machine equipment

What are the correct maintenance methods of brick machine equipment

Due to the long direct contact time between hollow brick and solid waste aggregates such as garbage, fly ash, mineral hot sand, slag and cinder, a small amount of impurities such as garbage and sand ash are attached to equipment such as conveyors and hosts, and enter into the equipment with the vibration of moving parts and attach to the inner wall of bearings and other parts

Impurities and materials attached to the conveyor belt for a long time will wear the bearing of the conveyor belt roller and penetrate the rubber surface of the conveyor belt of the wool film machine, resulting in damage; If these impurities and materials are attached to the tail wheel and the steering roller for a long time, the belt will snake, and the result is naturally unimaginable. It can be seen that when the material is attached to the driving drum, the rubber layer of the drum will be damaged, and the skid phenomenon will occur, and how much influence the cleaner has on the auxiliary belt conveyor of the hollow brick machine.

If these dust, material impurities, water pollution, etc. are attached to the main body of the hollow brick machinery for a long time, it will accelerate the wear of the mold and affect the molding quality of the product; With the work of the hydraulic system, foreign matter is mixed into the hydraulic pump and hydraulic cylinder, which will cause serious wear to the inner wall of the equipment, resulting in loss of pressure, insufficient pressure, low speed, noise and high temperature, which will cause the case jam in serious cases, resulting in the equipment cannot work normally.

As a large mechanical equipment, the maintenance and maintenance of the automatic water permeating brick machine is indispensable. Formal maintenance can reduce the probability of equipment failure by 50% and extend the life of the equipment by 3 to 5 years. First of all, in order to find and eliminate the fault in the production of water-soaked brick machinery and equipment in time, the staff need to carry out reasonable stoppage maintenance. At present, in the tile market, many tile enterprises work overtime due to the large number of orders to meet the needs of customers and produce more products. Therefore, the equipment has been in a working state during production, and a long time will inevitably cause mechanical fatigue, so stopping maintenance is an effective means to carry out equipment maintenance.

Secondly, when the equipment is stopped for inspection, the staff should clean the production site, recover various tools unrelated to production, etc., check the stability of all fasteners, if loose, tighten in time, check whether the state of the active connection part is normal, check the power supply voltage before starting, whether it is stable

The stop inspection of the automatic hollow brick machine is mainly to check the forming body. During the inspection, the dust generated by the production vibration inside the machine should be cleaned, and the dust and other garbage on and next to the machine such as the motor, reducer, and hydraulic press should be cleaned after the inspection of several mouthpieces of the feeder. In addition, special attention should be paid to the place where leaks often occur during inspection, and it should be removed for repair when leaks are found many times. The daily cleaning and maintenance of the penetrating brick machine has the effect of reducing the probability of various equipment failures and reducing maintenance costs. Therefore, formal professional cleaning can effectively improve the efficiency and service life of permeable bricks, and good production status can ensure that the equipment brings greater production results.

What are the correct maintenance methods of hollow brick machine equipment? If you need more information, you can contact us at any time!